Rockwell Automation 1398-DDM-xxx ULTRA 100 Series Drives Installation Manual - Manual (Page 56)

Publication 1398-5.2 – PDF 1997
5-4 Installation
Figure 5.2 1398-DDM-009 and -009X, 1398-DDM-019 and -019X Mounting
Dimensions
Table 5.2: 1398-DDM-009 and -009X, 1398-DDM-019 and -019X Mounting
Dimensions
Dimension Dimension
mm inches mm inches
A 198.12 7.80 B 97.30 3.83
A1 184.9 7.28 B1 65.02 2.56
A2 6.35 0.25 B2 38.10 1.50
A3 13.0 0.51 B3 18.54 0.73
A4 60.7 2.39 B4 13.21 0.52
A5 94.49 3.72 B5 5.58 0.22
A6
a
5.0 0.20
A7 22.10 0.87 C 146.05 5.75
A8 31.75 1.25 C1 129.03 5.08
A9 8.64 0.34
A10 31.75 1.25
A11 57.15 2.25
a. Power Cable bracket extends up to 20mm (0.80 inch)
A1
A2
A3
A4
A6
A5
C
C1
B
B1
B2
B4 B3
A
A7
A8
A9
A10
A11
Minimum unobstructed surrounding space
for cooling and exhaust air
Above 50.8 mm (2 inches)
Below 50.8 mm (2 inches)
Sides 12.5 mm (0.5 inches)
for cable bend radius
Front 76.2 mm (3 inches)
NOTE: Fan on 1398-DDM-019 only