Altera PCI Compiler - Manual (Page 239)

Altera Corporation User Guide Version 11.1 5–5
October 2011 PCI Compiler
Getting Started
c. Under Show in ‘Available device’ list, all fields should have
the default value of Any.
d. In the Available devices: list, select EP2S90F1020C3.
9. Click Next to display the New Project Wizard: EDA Tool Settings
page. You don’t need to turn on any settings on this page.
10. Click Next to display the New Project Wizard: Summary page.
11. Check the Summary page to ensure that you have entered all the
information correctly.
12. Click Finish to complete the Quartus II project.
Set Up the PCI-Avalon Bridge
To set up a PCI-Avalon bridge in the PCI Compiler, follow these steps:
1. To start SOPC Builder, select SOPC Builder from the Tools menu.
The Altera SOPC Builder window appears.
f
For more information on using SOPC Builder, refer to
Quartus II Help.
2. In the Create New System dialog box, specify the following and
click OK to continue.
a. Type chip_top in the System Name box
b. Under Target HDL, ensure Verilog is selected.
1
In this example, you are choosing the SOPC Builder-
generated system file to be the same as the project’s top
level file. This is not required for your own design.
3. Build your system by adding components from the System
Contents
tab.
Expand Interface Protocols, followed by PCI and select PCI
Compiler
.
4. Click Add. The PCI Compiler Parameters Setting is displayed.
5. In the Systems Options - 1 tab, use the default values.