Altera PCI Compiler - Manual (Page 352)

A–6 User Guide Version 11.1 Altera Corporation
PCI Compiler October 2011
Additional Options
For constraint files that have a default value of 66 MHz, you can override
the default value and change it to 33 MHz by typing the following
command:
add_pci_constraints -speed "33"
r
You cannot override a default speed value of 33 MHz.
EP4SGX230HF35
EP4SGX230KF40 -2, -3 -2, -3, -4
66 MHz
EP4SGX290FF35
EP4SGX290FH29 -2x, -3 -2x, -3, -4
66 MHz
EP4SGX290HF35
EP4SGX290KF40
EP4SGX290KF43 -2, -3 -2, -3, -4
66 MHz
EP4SGX290KF45
EP4SGX290NF45 -2 -2, -3, -4
66 MHz
EP4SGX360FF35
EP4SGX360FH29 -2x, -3 -2x, -3, -4
66 MHz
EP4SGX360HF35
EP4SGX360KF40
EP4SGX360KF43 -2, -3 -2, -3, -4
66 MHz
EP4SGX360NF45 -2 -2, -3, -4 66 MHz
EP4SGX530HH35
EP4SGX530KH40
EP4SGX530NF45
EP4SGX530KF43 -2 -2, -3, -4
66 MHz
EP4S100G2
EP4S100G3
EP4S100G4
EP4S100G5
EP4S40G2
EP4S40G5 -1, -2 -1, -2, -3
66 MHz
Note for Table A–1 :
(1) Pinouts are not provided for this device via the PCI constraint files. As no pinouts are available, the Pin Planner
(.ppf) files are not generated. The pinouts are provided during full compilation.
Table A–1. Default -speed Value for Supported Device Families
Device Family
Speed Grade Required for
66 MHz operation
Speed Grade Required for
33 MHz Operation
Default PCI Bus
Speed