Launch ip toolbench – Altera PCI Compiler User Manual
Page 38
1–4
User Guide Version 11.1
Altera Corporation
PCI Compiler
October 2011
PCI MegaCore Function Design Walkthrough
7.
Click Next to close this page and display the New Project Wizard:
Family & Device Settings
page.
8.
On the New Project Wizard: Family & Device Settings page,
choose the following:
●
In the Family list, choose Stratix as the target device family.
●
Under Target device, select a Specific device selected in the
‘Available devices’ list
.
●
Under Show in ‘Available device’ list, in the Speed Grade list,
choose Any.
●
In the Available Devices list, select EP1S60F1020C5.
1
These procedures create a design targeting the Stratix
device family. You can also use these procedures for other
supported device families. MAX II devices are supported
by the pci_mt32 and pci_t32 MegaCore functions only.
9.
The remaining pages in the New Project Wizard are optional. Click
Finish
to complete the Quartus II project.
You have finished creating your new Quartus II project.
Launch IP Toolbench
To launch IP Toolbench in the Quartus II software, follow these steps:
1.
Start the MegaWizard Plug-In Manager by choosing MegaWizard
Plug-In Manager
(Tools menu). The MegaWizard Plug-In Manager
dialog box is displayed.
f
For more information on MegaWizard Plug-in Manager,
refer to Quartus II Help.
2.
Specify that you want to create a new custom megafunction
variation and click Next.
3.
Under Installed Plug-Ins, expand the Interfaces>PCI folder, and
click on PCI to select the PCI Compiler v10.1.
4.
Select the output file type for your design; the wizard supports
VHDL and Verilog HDL. For this walkthrough, choose Verilog
HDL
.