Complete the connections in sopc builder – Altera PCI Compiler User Manual
Page 242
5–8
User Guide Version 11.1
Altera Corporation
PCI Compiler
October 2011
PCI Compiler with SOPC Builder Flow Design Walkthrough
Complete the Connections in SOPC Builder
You need to connect the ports of the components in your SOPC system.
1.
Move the pointer over the Connections column. Potential
connections are displayed.
2.
Connect the following master-slave ports:
shows the complete connections.
Figure 5–2. Master-Slave Port Connections
3.
Under Clock Settings, double-click the default speed (MHz) for
clk_0
and type 100.
Table 5–1. Master-Slave Port Connections
Master Port
Slave Port
pci_compiler
bar0_Prefetchable
onchip_mem
s1
pci_compiler
bar1_Prefetchable
pci_compiler
Control_Register_Access
pci_compiler
bar1_Prefetchable
dma
control_port_slave
dma
read_master
onchip_mem
s1
dma
read_master
pci_compiler
PCI_Bus_Access
dma
write_master
onchip_mem
s1
dma
write_master
pci_compiler
PCI_Bus_Access