Altera PCI Compiler - Manual (Page 30)

18 User Guide Version 11.1 Altera Corporation
PCI Compiler October 2011
Installation and Licensing
Figure 3. Directory Structure
qexamples
Contains example Quartus II projects and simulation waveforms for each of the PCI MegaCore functions.
ref_designs
Contains reference designs for common functions implemented with the PCI MegaCore functions.
testbench
Contains Verilog HDL and VHDL testbenches for simulating designs.
megawizard_flow
Contains the files that are specific for PCI Compiler with MegaWizard flow.
sopc_flow
Contains the files that are specific for PCI Compiler with SOPC Builder.
common
Contains shared components.
ip_toolbench
Contains common IP Toolbench files.
pci_compiler
Contains the PCI Compiler files.
inc
Contains a header file that can be used in PCI Compiler with SOPC Builder flow. The header
file contains macros to access control and status registers inside the PCI-Avalon bridge.
sopc_builder
Contains the necessary files for the SOPC Builder GUI. For Linux, this directory must be
added to the Component/Kit Library search path by choosing SOPC Builder Setup (File menu).
ip_toolbench
Contains the necessary files for the parameterization wizard.
lib
Contains encrypted lower-level design files and other support files.
On Linux systems, you must add this directory as a user library in the Quartus II software.
example
Contains example Quartus II projects using SOPC Builder.
testbench
Contains the Verilog HDL and VHDL testbenches for simulating designs that include the PCI-Avalon bridge.
const_files
Contains constraint files that include all necessary assignments to meet your PCI timing requirements for
all supported Altera device families and development kits.
ip
Contains the Altera MegaCore IP Library and third-party IP cores.
altera
Contains the Altera MegaCore IP Library.
<path>
Installation directory.