ATEIS IDA8 - Manual (Page 149)

Product Features 149
© 2012 ATEÏS
Use Evacuation Input components.
By using the Evacuation Input component, you can control the other logic components. The logic
signal is coming from the Evacuation Input component and going to any other input pins of the
logic component as you choose. Please refer to topic
Evacuation Input component.
They also can be used in the UGA mode, triggered by a voltage polarization change. To set this option,
you need to use Evacuation Input component, please refer to topic
Evacuation Input component.
4.1.10.2 Contact Output
In the IDA8C/S devices there are logic output channels for closing/opening a circuit of an external device.
There are two ways to configure it:
Assign an element to the evacuation output control:
502
502