ATEIS IDA8 - Manual (Page 15)

Safety Declartion 15
© 2012 ATEÏS
To prevent the unit from falling down and causing personal injury and/or property damage, avoid
installing or mounting the unit in unstable locations.
Leave enough space above and below the unit to provide good ventilation of the device. If the airflow is
not adequate, the device will heat up inside and may cause a fire.
Operate the device in an environment with a free-air temperature of between 0 °C and 40 °C (32 °F and
104 °F).
Turn off all audio equipment when making any connections to the device, and make sure to use
adequate cables.
Do not use benzene, thinner, or chemicals to clean the device. Use only a soft, dry cloth.
If the device is moved from a cold place (e.g., overnight in a car) to a warmer environment,
condensation may form inside the unit, which may affect performance. Allow the device to acclimatize
for about one hour before use.
3 Quick Start
3.1 for IDA8
Here is a simple demonstration showing how to configure the IDA8C and how to adjust the parameters
to get a 2K tone from the connected speaker.
1. Setup device and wiring:
Speaker is connected to the Amplifier Zone Output(Zone1).
Connect the ethernet cable between the speaker, PC and IDA8C.