ATEIS IDA8 - Manual (Page 505)

Components of Audio Processor 505
© 2012 ATEÏS
After events are linked to the component the control window lists them in grids:
Parameters:
Event Name:
Shows the name of the events linked.
Content:
Opens the event settings window.
State:
Specifies the state number for triggering an event.
Logic In:
Defines which condition will trigger the linked events.
Logic Out:
Defines output signal state after the linked event is executed. There are two cases which need
to be considered: The event executed is successful or has failed. To setup this configuration you
need to select the working output signal first: