ATEIS IDA8 - Manual (Page 310)

ATEIS - IDA8 310
© 2012 ATEÏS
In addition you will find a comprehensive selection of tools for system design and programming using our
Ateis Studio integrated software platform for all remote-controllable devices and systems.
As you can have a huge system, the software provides many functions making the navigation inside the
system easier by using different layers of the design which are freely configurable.
After the determination of the devices included in your system, you can start designing the internal
signal paths independently for each device with all the existing features the huge component library
offers, simply by drag and drop and connect different audio component.
This all is done in a straight forward and clear manner, helping you to concentrate on creating state-of-
the-art electro-acoustic environments.
This software allows management of all devices in the network from one computer. That means from one
computer and in one software interface you are able to update all the devices, to modify the configuration
and to store it into each device independently, and of course to check and update them.
Once the design is successfully compiled and loaded into the machine(s), you will have full access to all
the parameters in the system.
There are many controlling features starting from simple TTL I/O's over analogue voltage control to
advanced data communication. You can choose from a range of controlling devices or remote
microphones suitable to access parameters within the whole networked system.
5.1.2 System Requirement
Ateïs Studio runs on Windows XP, Vista and Seven.
At least 1GB RAM, 2GHz processor is recommended.
Disk Space required is 100MB.