ATEIS IDA8 - Manual (Page 355)

System Functionality 355
© 2012 ATEÏS
On the right side of window, there is a knob to simulate the source that triggers the event. If you
adjust the knob, the value of elements also changed.
Control Type:
This option determines the type of knob simulation. There are two options of Control Type:
o Value:
Knob adjust value of elements using native value.
o Percent:
Knob adjust value of elements by percentage.
Element:
Indicates which element of the component is controlled by the value trigger.
Component:
Indicates which component of the device contains the previously mentioned element.
Device:
Indicates which device contains the previously mentioned component.
System:
Indicates which system contains the previously mentioned device.
Min:
Specifies the minimum value of the simulating knob.
Max:
Specifies the maximum value of the simulating knob.
Remove:
Removes the element controlled by the event.
This operation only removes the relation between the element and event and does not delete
the element.
Clear:
Removes all elements controlled by the event.