ATEIS IDA8 - Manual (Page 51)

Product Features 51
© 2012 ATEÏS
o 1K tone: Press to check the 1K tone.
o Reset Monitor: Stop monitoring.
Data/Time:
Here you can set the current time, changes in this area would affect the schedulers.
Auto Logout:
Set the auto logout time, the unit is minute.
Ethernet:
Here you can set IDA8C's IP Address, Subnet and Gateway.
Brightness:
Here you can set the touch screen's brightness.
Menu Hold Time:
It will display the following pages after the menu hold time.
The priority of the displaying: EVAC (If during paging) > Fault List (If any faults are detected) > IDA8
Logo.
Warning Tone Level:
Here you can set the warning tone's level.
Audio Board Monitoring:
Here you can detect the wiring problem with the audio sources.