ATEIS IDA8 - Manual (Page 77)

Product Features 77
© 2012 ATEÏS
Device Connection Max. Num Function
Input
PPM AS PDC 31 Remote console for paging ability.
PSS AS PDC 1
Remote console for Paging and Event Triggering(Element
Control, Master/Sub Preset Control).
URC AS PDC 1
Remote console for Master/Sub Preset Controlling and Element
Controlling.
URGP PDC 1 Evacuation Input extension.
DNM PDC 31 Auto noise gain for audio signals.
PPM-IT5 Ethernet
1 Active
Over Eth
Paging, Element Control and Master/Sub Preset Control.
URC200
TPC
Ethernet Eth. Limit Parameters Control and Master/Sub Preset Control.
CD8 PDC 31
Wall mounted cabinet remote paging console with 8 buttons/
zones.
CD16 PDC 31
Wall mounted cabinet remote paging console with 16 buttons/
zones.
CD Touch PDC 1
Wall mounted cabinet remote paging console with touch screen
and Fireman Microphone.
PCP PDC 31
Wall mounted cabinet remote paging console with telephone
styled microphone.
CDPM PDC 31
Wall mounted cabinet remote paging console with 24 buttons/
zones and 2 extra selectable microphone sources.
PSC PDC 31
A grouped console is comprised of a pad with a monitoring
speaker, a pad with a gooseneck and 8 buttons/zones, and two
pads with 8 buttons/zones.
Deskpad PDC 1
A remote dialer for making telephone calls via IDA8's telephone
hardware.
Deskpad
Box
PDC 1
An RF transceiver to communication between Deskpad and
IDA8, use it, Deskpad can work without a physical connection.
Max. Num means you can connect one or more peripheral units through the connector by using
Junction Box. For example: On the PDC, you can connect 32 PPM AS through junction boxes
and are able to assign IDs in sequence for each unit in Ateis Studio. Note: One IDA8C has 4 PDC
ports, and the sum of remote units is 32. Basically, fireman MIC already has one position
allocated, so this table only shows the maximum as 31.
Eth. Limit: The maximum numbers of IP that can be assigned over the network.
4.1.5 Network Wiring
There are three cases of an Ateis Net connection:
Global Net + Local Net
Only Local Net
None
The following three diagrams show how to connect the IDA8Cs and the IDA8SABs through A, B port of
the Global/Local Ateis Net.
1 IDA8C and 1 IDA8SAB connect through Local Ateis Net: