ATEIS IDA8 - Manual (Page 514)

ATEIS - IDA8 514
© 2012 ATEÏS
Specifies the condition to deactivate a scheduler. There are three types of stop condition:
Continue:
In this option, scheduler will never stop. Triggering mode settings are always valid.
Number of Times:
Scheduler is triggered N times using triggering mode settings where N can be set at "Number
of Times parameter".
Stop Time:
Scheduler is activated from start time to the time specified in the "Stop Time parameter".
Triggering Mode:
The triggering mode defines the rule of triggering a pulse to output.
Periodic:
The interval is the time between two triggers.
Cyclic: