ATEIS IDA8 - Manual (Page 176)

ATEIS - IDA8 176
© 2012 ATEÏS
4.2.1.5.2 Front Panel
Secondary Active Indicator:
This LED light up if active system is primary audio processor.
Primary Active Indicator:
This LED light up if active system is secondary audio processor.
Fault Indicator:
This LED light up if the unit is set to be slave, and a short or open is detected on S. WD(Secondary
Watching Dog) port.
Note: If this indicator light up, it means there is an error of the unit, user needs to check wiring of S.
WD connector or replace by a good unit.
Power Indicator:
This LED light up if this unit is power on.
4.2.1.5.3 Characteristics
Dimension = 436mm x 150mm x 44mm.
power consumption : 350mA @24Vdc
4.2.1.6 RU-CTL
4.2.1.6.1 Overview