ATEIS IDA8 - Manual (Page 224)

ATEIS - IDA8 224
© 2012 ATEÏS
4.2.7 URGP
4.2.7.1 Overview
The URGP is an extension unit for the IDA8-System, LAPG2T and ECS. Each URGP provides those
systems with 32 additional alarm inputs. Each input is monitored and can be programmed to trigger a
digital audio message into a specific zone or group of zones. The URGP is linked to the System units
through a RS232 /RS485 monitored serial link.
4.2.7.2 Front Panel
Evacuation LED:
Lights up in red when the Evacuation input is active or blinks while boot.
Following table lists the states of the Evac LED:
Status Frequency Activity
Continuous One of the Evacuation inputs is active.
Blinking ° ° Blinks 5 times after powered on.
Fault LED:
Displays fault status of system. the following table lists the states of the Fault LED: