ATEIS IDA8 - Manual (Page 85)

Product Features 85
© 2012 ATEÏS
Amplifier B3 serves Zone 13 ~ zone24.
Software settings for the backup amplifier:
It is necessary to have software settings to make the backup amplifier function.
Numbers in the above figure show the steps to ope then backup amplifier settings window:
1. Right click mouse on IDA8C1 block in devices window, then click item [Monitor] to open
window "Monitor(Matrix Mode) - IDA8C1".
2. Select tab [Backup Amplifier Monitor].
3. Click button [Amplifier Amount].
The figure below shows the software setup window for the backup configuration in the Advance
Backup Amplifier Setup :