ATEIS IDA8 - Manual (Page 581)

Components of Audio Processor 581
© 2012 ATEÏS
This component is a bridge between the Ateis device and the Voxnet device. It maps the key in the
Voxnet protocol to the code in an event for paging control.
Settings Window:
There are two channels for paging with Voxnet source, each source with the following settings:
Paging Event:
Specify the paging event to bind with the Voxnet source for paging.
Key:
Represents the key of the Voxnet protocol.
Value:
Specifies the code which is mapped to the key. Each code represents a zone selection
combined for paging.
All:
Selects all zones.
Zone Selection:
Check the checkbox inside the grid at the right side of window to select a zone for paging.