ATEIS IDA8 - Manual (Page 56)

ATEIS - IDA8 56
© 2012 ATEÏS
Optional card to build a local dedicated IDA8C-IDA8S network.
Configurable Audio I/Os:
Two configurable 0dB audio I/O port A and B. Each port is available to assemble an audio card.
There are 4 channels on each audio I/O card.
Telephone Line Input:
A connector for a telephone signal coming from telephone company.(optional).
Telephone Connector:
A connector for external telephone connection.(optional).
Contact Outputs:
8 logic output channels to close/open circuit for an external device. This contact is normally open.
Evacuation Inputs:
9 evacuation contact inputs that allow the monitoring of external contact. They also can be used in
UGA mode and are triggerred by a voltage polarization change.
24V DC Output:
This connector supplies a 24VDC source.
24V DC Input:
Main 24VDC power supply connector.
AC Power Socket:
Main 110~240 V 1.2A, 47~63Hz AC power input with fuse. If 24V DC and AC power are input at the
same time, IDA8C will use AC power, and switch to DC power if there is no AC power input.
Fuse Rating: 1.6A
4.1.2.4 Characteristics
Case:
Dimension = 436mm (W) x 289mm (L) x 88mm (H)
Weight = 5Kg
Color = RAL7016
Power:
Item Voltage Current Consumption Comment
AC Input 100V~240V 1.2A@100V, 0.5A@240V Frequency:47Hz~63Hz
DC Input 18V~26V, Typical 24V 2A -
DC Output 18V~26V, Typical 24V 0.5A -
AC Maximum Consumption = 45 W
Amplifier Zone Outputs: