Trans error, Audio overflow – ATEIS IDA8 User Manual
Page 94
ATEIS - IDA8
94
© 2012 ATEÏS
4.1.7.1.1.9 Trans Error
Fault Meaning:
There is an internal hardware error of device.
Fault Indication:
LED Indicator:
When this error is detected, the following LEDs will light up:
o
System Fault LED on the front panel of the IDA8C/S.
o
G. Fault LED on the front panel of the IDA8C/S.
Log:
Text messages display on the touch screen of the IDA8C as:
"Trans Error"
Also, the text messages display at the [Machine Fault Record] window in Ateis Studio:
A buzzing sound outputs to the monitoring speaker on the front panel of the IDA8C.
Fault Handling:
Contact your technician to repair device.
4.1.7.1.1.10 Audio Overflow
Fault Meaning:
The output level is too high or there is a DSP chip operate error.
Fault Indication:
LED Indicator:
When this error is detected, the following LEDs will light up:
o
System Fault LED on the front panel of the IDA8C/S.
o
G. Fault LED on the front panel of the IDA8C/S.
Log:
Text messages display on the touch screen of the IDA8C as:
"Audio overflow"