ATEIS IDA8 - Manual (Page 515)

Components of Audio Processor 515
© 2012 ATEÏS
The Occurrence parameter determines the cycle type of triggering. There are five types
available: Hourly/Daily/Weekly/Monthly/Yearly. It allows the user to define the interval between
cycles by specifying the parameter of Every N cycle unit where the cycle unit can be Hour/Day/
Week/Month/Year.
The box lists the Time of Triggering. You can add or remove the triggering time in the cycle.
By Excel File
It allows the user to specify the triggering times by using an excel file. The rules are listed
below:
Field A1 is the "Year.Month" for scheduling. Note: Refer to the format as shown in the picture
above.
B1 ~ X1 is the field for time format, there are two choices:
o 24HR
o AM/PM
A2 ~ A 32 represents the day of a month.
For each row, B to X fields are the time to be triggered.
Exception Duration
Even through the mechanism for triggering time setup is very flexible the exceptions are still needed.
At the lower part of the scheduler settings window, a block of "Exception Duration" allows the user
to edit a list for the exceptions of the triggering. Each exception consists of a start time and a stop
time. During the exception time all triggering will be masked.