ATEIS IDA8 - Manual (Page 196)

ATEIS - IDA8 196
© 2012 ATEÏS
EVAC LED:
Status Frequency Activity
Permanent System is under evacuation paging.
Blinking ° ° PPM AS does not do a "Plug-in" in Ateis Studio before using.
Note: "Remote Plug-in" makes audio processor to recognize the peripheral devices.
Power LED:
This LED light up when the PPM AS is powered on.
Hold LED:
These LEDs Indicate which keys are selected.
Event Select Key:
These buttons are used to select keys, each key may link to an event for triggering actions like
paging or adjust the value of parameters.
All/Release LED:
This indicator lights up if all keys are selected.
All/Release Button:
This button is used to select or deselect all keys.
Talk Key:
Push this key to request paging.
Talk Indicator:
This LED light up if PPM-AS is allowed to paging, on the other word, the paging request has been
acknowledged.
Note: Sometimes even the paging request is granted, zones under paging still can be occupied by
other sources with higher priority. In the event of, the talk LED still lights up, you can check it from
busy LEDs.
Busy LED:
Show the status of zone:
Color Status Frequency Activity
Red Permanent Priority of the zone is lower than other sources.
Green Blinking ° ° Priority of the zone is higher than other sources.
Green Permanent
The zone only desired for paging is not using by other
sources.