ATEIS IDA8 - Manual (Page 174)

ATEIS - IDA8 174
© 2012 ATEÏS
There are two connectors of this output:
PRI: Connect to Power Supply PRI connector next RU-MAIN/PDC/CTL.
SEC: Connect to Power Supply SEC connector next RU-MAIN/PDC/CTL.
Power Supply:
24V DC power input, which is connect to 24V DC Output of IDA8C/S.
There are two connectors of this input:
PRI: 24V DC power input from primary audio processor.
SEC: 24V DC power input from secondary audio processor.
Speaker Zone Output:
There are 8 zones for speaker connection. each zone consists of following connectors(from left to
right):
P_LINEA: Connect to speaker zone output line A of primary audio processor.
P_LINEB: Connect to speaker zone output line B of primary audio processor.
LINE A: Connect to line A speaker.
LINE B: Connect ot line B speaker.
S_LINE A: Connect to speaker zone output line A of secondary audio processor.
S_LINE B: Connect to speaker zone output line B of secondary audio processor.
Zone Amplifier Output:
There are 8 zones for amplifier output connection, it receive the gained audio signal coming from
normal amplifier, each amplifier output consist of three connectors:
P_AMPO: Connect to normal amplifier output connector of primary audio processor.
AMPO: Connect to output of normal amplifiers.
S_AMPO: Connect to normal amplifier output connector of secondary audio processor.
Backup Amplifier Output:
There are two backup amplifier outputs on RU-MAIN, each output consist of three connectors:
P_AMPO: Connect to backup amplifier output of primary audio processor.
AMPO: Connect to backup amplifier output.
S_AMPO: Connect to backup amplifier output of secondary audio processor.
Backup Amplifier Input:
There are two backupt amplifier inputs on RU-MAIN, each input consist of three connectors, where N
is the number of channel:
P_BKP N: Connect to backup amplifier input of primary audio processor.
BKP N: Connect to input of backup amplifier.