ATEIS IDA8 - Manual (Page 539)

Components of Audio Processor 539
© 2012 ATEÏS
Description:
This component transfers audio signals over Ateis Net.The signal goes into a channel of a Net
Output component and is able to retrieve from the output with the same channel or any other Net
Input component (i.e. the signal path is one to many relationship). There are 48 channels available to
carry signals, they are numbered and identified by the number. For example, when a signal goes
into channel 1 of the component Net Output A you can get it from the component Net Input A
channel 1.
The following diagram shows a simple example using IDA8 devices to show the configuration of the
Net Input and Net Output components.
In Device editing window, create an IDA8C and an IDA8SAB. Wires connect from NB to NA pins on
the block to create a Ateis Net system:
In the DSP design window of IDA8C, it utilizes the Net Input/Output channel 1 to transport audio
signal from Input A channel in IDA8C to Output C channel in IDA8SAB.