Trigger – ATEIS IDA8 User Manual
Page 504
Advertising
ATEIS - IDA8
504
© 2012 ATEÏS
6.12.4.1 Trigger
Component Template:
Component Appearance:
Description:
This component links events to the logic signal. The linked events will be triggered if the input logic
signal of the component is from Low to High or from High to Low depending on the settings.
Control Window:
When dragging and dropping of the component for a DSP design, a window will show to specify the
input and output channel counts:
Double-click the component and the control window will show. There are several tabs on the top of
the window. Each tab is for a logic input channel:
Advertising