ATEIS IDA8 - Manual (Page 235)

Product Features 235
© 2012 ATEÏS
THD @ 1kHz < 1%.
Bandwidth @ -3dB = 200Hz ~ 20kHz.
Front Panel Speaker
Impedance = 8Ohm.
Maximum Power @ 1kHz = 1W.
THD @ 1kHz < 1%.
Bandwidth @ -3dB = 200Hz ~ 8kHz.
Cable length
100m(control and power on the same cable)
900m(when power line connects to junction box).
Comes standard with Junction box (JB) and CAT5 cable (1.5)
4.2.9.4 Maintenance and Troubleshooting
This chapter will help you to diagnose the common problems for troubleshooting and how to solve. The
maintenance of the device and peripherals are also told here.
If none of the solution works, please contact your Ateis dealer.
The LED indicators:
When the EVAC LED blinks
When the EVAC LED blinks, it possibly is the plug-in problem.
Please read this.
When the FAULT LED blinks
When the FAULT LED blinks, it means the paging console lose the communication with audio
processor.
Please use the Ateis Studio to check the paging console component is added correctly, and then
store the table into the paging console.
372