ATEIS IDA8 - Manual (Page 414)

ATEIS - IDA8 414
© 2012 ATEÏS
(Advanced) that is not allowed to mute or bypass the signal of the input. There are two ways to
adjust the delay time for a channel. The first is by adjusting element Delay time, the second is by
adjusting the Element Temp and Distance to compute the delay time. Element Type can be
switched between two modes.
Control Window:
Element Properties:
Name Initial Minimum Maximum Precision Unit
Type On - - - -
Delay time 0 0 *1 *2 µs
Temp 20 -10 50 0.1 °C
Distance 0 0 *3 0.01 m
*1: The maximum value of Delay time in various type of Delay (Basic).
Type Maximum
5ms 5000 µs
50ms 50000 µs
100ms 100000 µs
200ms 200000 µs
500ms 500000 µs
1000ms 1000000 µs
2000ms 2000000 µs
*2: The precision value of Delay time in various type of Delay (Basic).
Type Maximum
5ms 5 µs
50ms 20 µs
100ms 20 µs
200ms 20 µs
500ms 20 µs