ATEIS IDA8 - Manual (Page 22)

ATEIS - IDA8 22
© 2012 ATEÏS
9. Check the compatibility between the IDA8C and the Ateis Studio. Click [Read Version] in the menu.
A window [Version] opens. Press the [Read] button to see the information about the firmware
version.
If all firmware units are compatible ( shown in black text ) with Ateis Studio, go to step 11, otherwise
go to step 10 to update the firmware. The below figure shows an incompatible version of the firmware
which is marked in red.
10.Update firmware:
Close the [Version] window and go back to the [Device Management] window. Next, click the
[Update] function: