ATEIS IDA8 - Manual (Page 63)

Product Features 63
© 2012 ATEÏS
Line B Error
Backup AMP Error
AMP Line Leakage Error
4.1.3.3 Rear Panel
Backup Amplifier Output:
This connector connects to the output of the backup amplifier for receiving the 100V audio signal
powered by the amplifier.
Bypass Mode Outputs:
This port is used to share the bypass mode microphone signals through the IDA8C-IDA8S network
(only needed when using fiber optic network).
PDC (Peripherals Device Controller) Connectors:
Two RJ-45 connectors are used to connect consoles or peripheral devices. For examples, PSS AS,
URC AS, PPM AS connect to the IDA8SAB via this connector.
Local Ateis Net Connectors:
The optional card for building a local dedicated IDA8C-IDA8S network.
Zone1 Speaker Line Output:
This connector is used to connect the loudspeaker of zone1, the below picture shows how to
connect the speaker.