Super Systems PC Configurator 2 User Manual
Page 102
Super Systems Inc.
Page 102 of 201
Configurator Manual #4562 Rev D
PV 2 Value
PV 3 Value
Input
1
Value
Input
2
Value
Input
3
Value
PO1
Value
PO2
Value
PO3
Value
The values in the second (bottom) list box are:
Process
High
Process
Low
Band, Normally Open
Band, Normally Closed
Deviation,
Normally
Open
Deviation, Normally Closed
Hysteresis:
This value is the Hysteresis value. Clicking on this value will display an input box from which
the user can select a new value. The range is from 0 to 9999.
Smart Alarm:
This value is a display of the Smart Alarm status. The value can be either disabled or
enabled.
ON Delay Time:
This value is the ON Delay Time. Clicking on this value will display an input box from which the
user can select a new value. The range is from 0 to 9999.