Zone/load tc setup – Super Systems PC Configurator 2 User Manual
Page 88
Super Systems Inc.
Page 88 of 201
Configurator Manual #4562 Rev D
Zone/Load TC Setup
Configurator – Zone/Load TC Setup menu option
Configuration of any analog input device must be completed with this menu item.
Load TC Enable
This value will manually toggle between on, on + alarms, and off.
On – T/C Enabled
On + alarms – T/C Enabled, Programmer alarm114 provided if out of band (Default wait limits)
Off – T/C not enabled
Control TC
This value allows the user to set the TC to be part of the group of Load TCs that can hold the
program if it is out of band. The values are active or not active, shown as blank
TC 1 - 24
This value allows the user to manually turn the T/C from active to not active, shown as blank,
to be part of the group of TCs that can hold the program if it’s out of band