Super Systems PC Configurator 2 - Manual (Page 58)

Super Systems Inc. Page 58 of 201 Configurator Manual #4562 Rev D
Generic Mapping Setups
Configurator – Generic Mapping Setups menu option
This menu option will allow the user to configure a generic instrument for the 9005 controller.
Clicking on the “click” in the value column will start the configuration process by displaying the
Generic Instrument Edit form.
Configurator – Generic Instrument Edit form
Communications and Mapping Table Section
This section of the form allows the user to set up the communications information for the
generic instrument, as well as the mapping for the process variable, setpoint, and output.
The top drop-down list will allow the user to select which instrument to set up. The options
are: Instrument 1 – Instrument 16.
Note: If any changes have been made to the current