Relay assignments – Super Systems PC Configurator 2 User Manual
Page 103
Super Systems Inc.
Page 103 of 201
Configurator Manual #4562 Rev D
Relay Assignments
Configurator – Relay Assignments menu option
The 9200 Dual Loop controller has the option of using eight relay outputs. All of the relays have
a positive common terminal and independent negative terminals. All of the relays are configured
in a normally closed position except relay number eight, which has both a normally closed (NC)
and a normally open (NO) terminal.
Relay Output Terminals:
Relay Output 1 – terminals 7 and 8
Relay Output 2 – terminals 7 and 9
Relay Output 3 – terminals 7 and 10
Relay Output 4 – terminals 7 and 11
Relay Output 5 – terminals 7 and 12
Relay Output 6 – terminals 7 and 13
Relay Output 7 – terminals 7 and 14
Relay Output 8 – terminals 7 and 15 NC
Relay Output 8 – terminals 7 and 16 NO
Default Configuration:
Carbon:
Relay Output 1
Loop 2 - Forward
Relay Output 2
Loop 1 - Forward
Relay Output 3
Loop 1 - Reverse
Relay Output 4
Burn off
Relay Output 5
Alarm 1