Super Systems PC Configurator 2 - Manual (Page 32)

Super Systems Inc. Page 32 of 201 Configurator Manual #4562 Rev D
Configurator – Confirm advance to the next step
Clicking on the Yes button will advance the recipe to the next step, while clicking on the No
button will cancel the advance.
If there is an alarm of any kind, the alarm text will be displayed at the bottom of the program
display area with a red highlight, and the Ack button will become visible.
Configurator – Program with alarm
Clicking on the Ack button will acknowledge the alarm. Once the alarm has been
acknowledged, the Ack button will disappear, and the alarm text will disappear as well.
The Soak button will allow the user to manually change the length of a soak time. To do this,
click on the Soak button.
Note: The recipe must be in a soak step for this button to be
enabled . This will display the Soak Timer dialog box.
Configurator – Adjust soak time
The current soak time will be displayed initially. To set a new soak time, change the hours
and/or minutes to the desired values and click on the Set button.
Note – This change will