Super Systems PC Configurator 2 - Manual (Page 69)

Super Systems Inc. Page 69 of 201 Configurator Manual #4562 Rev D
This option will display the current date and time on the 9120 controller. From this menu
option, the user can change the date/time
on the 9120 controller .
Furnace Name:
This value will define the name of the furnace. Clicking on the “Value” column will bring up an
input box where the user can enter the furnace’s name.
PV1 Name:
This value will define the name of the first process variable. Clicking on the “Value” column will
bring up an input box where the user can enter the PV’s name.
PV2 Name:
This value will define the name of the second process variable. Clicking on the “Value” column
will bring up an input box where the user can enter the PV’s name.
PVT Type:
The PVT type is the mode the device runs in (Carbon, Dewpoint, etc.). The mode selected
determines the calculations and scaling for the Process Variable. Any time this selection is
changed it is necessary to reset the factory defaults to ensure all parameters have been
changed to the new Process Variable. Clicking on this value will display an input box with a
drop-down list from which the user can select a new PVT Type. The values for the PVT type
are: % Carbon, Dew Point, Oxygen, Millivolt, or Redundant Probe.
Temperature Mode:
This value determines the specific temperature scale to be used. It can be either Degrees
°F or
degrees °C.
Level 1 Code:
Typically, operations used by a supervisor require a level 1 code for access. When a supervisor
is logged in, the lock on the toolbar will be gold, . To change the level 1 passcode, click on
the “Level 1 Code” value (range is –32768 to 32767) and an input box will be displayed
where the user can select a new value.
Level 2 Code:
Typically, operations used by an administrator require a level 2 code for access. When
an administrator is logged in, the lock on the toolbar will be green, . To change the level 2
passcode, click on the “Level 2 Code” value (range is –32768 to 32767) and an input box will
be displayed where the user can select a new value.
Web Level 1 Code:
This value is the supervisor-level passcode for any web-based operations with the 9120
controller. The range for the passcode is 0 to 9999.
Web Level 2 Code:
This value is the administrator-level passcode for any web-based operations with the 9120
controller. The range for the passcode is 0 to 9999.
Web Change Enable: