Super Systems PC Configurator 2 - Manual (Page 118)

Super Systems Inc. Page 118 of 201 Configurator Manual #4562 Rev D
Event Control
Configurator - Event Control menu option
The Event control provides the user manual control of actual event outputs. This is useful when
testing wiring and field devices.
Hold Instrument Number:
Clicking on this value will display an input box from which the user can select a new value. The
range is 0 to 25.
Hold Minimum PV:
Clicking on this value will display an input box from which the user can select a new value. The
range is 0 to 4000.
Hold Maximum PV:
Clicking on this value will display an input box from which the user can select a new value. The
range is 0 to 4000.
Event for Program Run:
Clicking on this value will display an input box from which the user can select a new value. The
range is –1 to 15.
Event for Program Reset:
Clicking on this value will display an input box from which the user can select a new value. The
range is –1 to 15.
Event 0 Through Event 15:
The input box for these events has two drop-down lists. The top list contains active and
inactive, and the bottom list contains closed and open.