Programmer setup – Super Systems PC Configurator 2 User Manual
Page 54
Super Systems Inc.
Page 54 of 201
Configurator Manual #4562 Rev D
Programmer Setup
Configurator – Programmer Setup menu option
This menu option will allow the user to set up each programmer, Programmer 1 –
Programmer 4, with programmer-specific values.
Programmer Type:
This value will determine what type the programmer is. The list of values is:
%
Carbon
Multi-Loop
Dew Point
% Carbon + Dual Temp
%
O2
Cascade
Millivolts
Programmer Name:
This value will apply a name to the programmer. There will be an input box for the user to
enter the name.
Temp Wait Limit:
This value will define the temperature wait limit. The range is 0 to 4000.
Atm Wait Limit:
This value will define the atmosphere wait limit. The range is 0.00 to 40.00.
Atmosphere Instrument:
This value will define which instrument will be the atmosphere instrument. The list of choices
is: Instrument 1 through Instrument 25.
Temperature Instrument: