Super Systems PC Configurator 2 - Manual (Page 62)

Super Systems Inc. Page 62 of 201 Configurator Manual #4562 Rev D
DF1 Configuration
Configurator – DF1 Configuration menu option
My Node:
This option will allow the user to select the node. This node must not exist anywhere else on
the computer’s network. The range is 0 to 30000.
PLC node:
This option will allow the user to select the PLC node. This must be the node address of a PLC.
The range is 0 to 30000.
PLC table:
This option will allow the user to select the PLC table. The range is 0 to 30000.
PLC table offset, read:
This option will allow the user to select the PLC table read offset. This is the read offset for the
PLC. The range is 0 to 30000.
PLC table offset, write:
This option will allow the user to select the PLC table write offset. This is the write offset for
the PLC. The range is 0 to 30000.
PLC read count:
This option will allow the user to select the PLC read count. This will be the number of words to
read from the PLC. The range is 0 to 30000.
PLC write count:
This option will allow the user to select the PLC write count. This will be the number of words
to write to the PLC. The range is 0 to 30000.