Super Systems PC Configurator 2 User Manual
Page 95
Super Systems Inc.
Page 95 of 201
Configurator Manual #4562 Rev D
and minus the value of the setpoint specified in the recipe. You can define specific wait limits
per program that supersede the defaults with the specific wait limit OP CODE per program
(SETWAIT).
Configurator – Default Wait Limits menu option
Factory Default configuration:
Carbon:
Parameter Value
Default Wait Limit for Temperature
15
Default Wait Limit for Atmosphere
0.10
Dewpoint:
Parameter Value
Default Wait Limit for Temperature
15
Default Wait Limit for Atmosphere
10
%O2:
Parameter Value
Default Wait Limit for Temperature
15
Default Wait Limit for Atmosphere
1.0
MV:
Parameter Value
Default Wait Limit for Temperature
15
Default Wait Limit for Atmosphere
10
Multiloop:
Parameter Value