Super Systems PC Configurator 2 - Manual (Page 66)

Super Systems Inc. Page 66 of 201 Configurator Manual #4562 Rev D
This option will allow the user to select the gas compensation type for the vacuum gauge. The
options are:
Air/CO/O2/N2
Helium
Neon
Argon
Krypton
Xeon
H2
CO2
Water vapor
Freon 12
Native Scaling:
This option will allow the use to set up the native scaling for the vacuum gauge. The options
are:
Torr
Microns
Millibars
Bars
Pascals
Kilopascals
Log of torr
Display Maximum:
This option will allow the user to set the maximum value for display purposes. The range is: -
10.00 to 10.00 with an exponent range of –31 to 31.
Zero Scale Value:
This option will allow the user to set the zero scale value for the vacuum gauge. The range is:
-10.00 to 10.00 with an exponent range of –31 to 31.
Span Value:
This option will allow the user to set the span value for the vacuum gauge. The range is: -
10.00 to 10.00 with an exponent range of –31 to 31.
Display Scaling:
This option will let the user set the scaling for display purposes. The options are:
Log torr
Torr
Microns
Millibars
Pascals