Super Systems PC Configurator 2 - Manual (Page 42)

Super Systems Inc. Page 42 of 201 Configurator Manual #4562 Rev D
54 – Click the OK button.
55 – On the main form, click on the “Edit Recipes” icon ( ).
56 – Click on the “Recipe Management” tab. Make sure the “Recipes” tab is selected.
57 – In the “Transfer” section of the form, use the drop-down menu to the right of “Source”
to
select the group used in Step Number 20.
58 - Make sure the “Use Online Device” is checked so that the “Destination” will be the
upgraded controller.
59 – Make sure the “Send Multiple” option is selected. Make the left numeric value box 1, and
make the right numeric value box 300. This will restore all the recipes from 1 to 300.
60 – Click the Send button. The user must wait until the status bar is complete and all 300
recipes have been restored before attempting to move on or click on any items.
63 – Click the Done button to return to Configurator’s main form. The configuration and recipes
have been restored.
64 - Using the
Analog Input Setup section of the Super Systems Inc. Configurator, manually
change Input 1 type to 1.25 volts.
65 – Exit the Super Systems Inc. Configurator software.