Super Systems PC Configurator 2 - Manual (Page 116)

Super Systems Inc. Page 116 of 201 Configurator Manual #4562 Rev D
Configurator – Passcodes and Alarms menu option
Operator Level:
These are functions typically handled by a furnace operator and do not require a passcode.
When an operator is logged in, the lock on the toolbar will be blue, .
Supervisor Level:
These are functions typically used by a supervisor and require a level 1 passcode. When a
supervisor is logged in, the lock on the toolbar will be gold, . To change the level 1 passcode,
or the web level 1 passcode, click on the “Level 1 Code” value (range is –32768 to 32767) or
the “Web Level 1 Code” value (range is 0 to 9999) and an input box will be displayed where
the user can select a new value.
Administrator:
These are functions typically used by an administrator and require a level 2 passcode. When an
administrator is logged in, the lock on the toolbar will be green, . To change the level 2
passcode or the web level 2 passcode, click on the “Level 2 Code” value (range is –32768 to
32767) or the “Web Level 2 Code” value (range is 0 to 9999) and an input box will be
displayed where the user can select a new value.
SSi Special:
These are functions that cannot be accessed without a passcode provided by Super System Inc.
These functions are vital to the operating modes of the controller and are typically never
modified. When an SSi Special user is logged in, the lock on the toolbar will be red, .
Web Change Enable:
Clicking on this value will toggle between a 1 and a 0.