Super Systems PC Configurator 2 - Manual (Page 123)

Super Systems Inc. Page 123 of 201 Configurator Manual #4562 Rev D
Curve Entry
Configurator – Curve Entry menu option
Curve Entry is typically used for Vacuum and Nitriding applications. It allows the user to enter
custom flow curves and vacuum gauge curves for Curve 1 through Curve 5.
Curve Type:
This is the type of curve. The options are none or linear.
Control Range:
The is the control range for the curve. The range is 0 to 32000.
mV
X (1 – 32):
Clicking on this value will display an input box from which the user can select a new millivolt
value. The range is from 0 to 32000.
Vac
X (1 – 32):
Clicking on this value will display an input box from which the user can select a new vacuum
value. The range is from 0 to 32000.