Super Systems PC Configurator 2 - Manual (Page 166)

Super Systems Inc. Page 166 of 201 Configurator Manual #4562 Rev D
Relay Setpoints
Configurator – Relay Setpoints menu option
This option is typically used for vacuum applications.
The 9220 controller offers the user three pairs of configurable vacuum setpoints for each input.
Each pair of setpoints allows the user to configure both ON and OFF trigger points. The values
entered are in scientific units based on input configuration.
The relay setpoints can only be used once the relays are assigned as such in the
Relay
Assignments menu option.
Configurator – Edit Relay Setpoint screen
The left box has a range of –10.00 to 10.00, and the right box has a range of –31 to 31.