Super Systems PC Configurator 2 - Manual (Page 129)

Super Systems Inc. Page 129 of 201 Configurator Manual #4562 Rev D
Configurator – User Calibration screen 6
Calibrate the zero/span range for output 2 following the same procedure as before with output
1. Clicking on the <- Back button will display the previous screen. This is the last screen for
user calibration. Click on the Done button to close the screen down, or return to step 1 for
cold junction calibration.
Full Calibration
Configurator – Full Calibration screen 1
The
Calibration screen for the Full Calibration menu option is identical in function and layout to
the User Calibration’s Calibration screen. The only difference is the Full Calibration’s Calibration
screen contains more screens. This list of screens is listed below in sequential order. Screens
only found in the Full Calibration menu option are displayed in
Italics . Screens only found in the
User Calibration menu option are displayed in bold.
1. Cold Junction
2. Zero/Span Input 0/Range 0
3. Zero/Span Input 0/Range 1
4. Zero/Span Input 0/Range 2
5. Zero/Span Input 0/Range 3
6. Zero/Span Input 1/Range 0
7. Zero/Span Input 1/Range 1
8. Zero/Span Input 1/Range 2
9. Zero/Span Input 1/Range 3
10. Zero/Span Input 2/Range 0
11. Zero/Span Input 2/Range 1
12. Zero/Span Input 2/Range 2
13. Zero/Span Input 2/Range 3
14. Zero/Span Input 3/Range 2
15. Zero/Span Input 1 Range Jumper
16. Zero/Span Input 2 Range Jumper