Super Systems PC Configurator 2 User Manual
Page 135
Advertising
Super Systems Inc.
Page 135 of 201
Configurator Manual #4562 Rev D
value (the
P
and the
I
from
PID
). This could be applicable in an atmosphere loop, where the
rate won’t have much effect.
Once a set of values has been accepted, the user can press the Done button to exit the screen.
The accepted values can be viewed on the
PID Loop Setup
menu option
. Note: Once the
screen is closed out, the PID settings values will be lost
. To populate these values again,
another calibration routine will need to be run.
Advertising