Super Systems PC Configurator 2 - Manual (Page 56)

Super Systems Inc. Page 56 of 201 Configurator Manual #4562 Rev D
Event Control
Configurator – Event Control menu option
The Event control provides the user manual control of actual event outputs for each of the four
programmers. This is useful when testing wiring and field devices.
Hold Instrument Number:
Clicking on this value will display an input box from which the user can select a new value. The
range is 0 to 32.
Hold Minimum PV:
Clicking on this value will display an input box from which the user can select a new value. The
range is 0 to 4000.
Hold Maximum PV:
Clicking on this value will display an input box from which the user can select a new value. The
range is 0 to 4000.
Event for Program Run:
Clicking on this value will display an input box from which the user can select a new value. The
range is –1 to 15.
Event for Program Reset:
Clicking on this value will display an input box from which the user can select a new value. The
range is –1 to 15.
Event 0 Through Event 15:
The input box for these events has two drop-down lists. The top list contains active and
inactive, and the bottom list contains closed and open.