Vacuum gauge setup – Super Systems PC Configurator 2 User Manual
Page 65
Super Systems Inc.
Page 65 of 201
Configurator Manual #4562 Rev D
Vacuum Gauge Setup
Configurator – Vacuum Gauge Setup menu option
The Vacuum Gauge Setup menu option will allow the user to set up the vacuum gauges for the
9005 controller. The user can setup: Vacuum Gauge 1 – Vacuum Gauge 4.
Gauge Enable:
This option will either enable or disable the gauge. Click the Yes option to enable the gauge,
or click the No option to disable the gauge.
Vacuum Source:
This option will allow the user to select the source of the vacuum gauge. The options are:
Input 1
Input 2
Input 3
Televac Gauge 1
Televac Gauge 2
Televac Gauge 3
Televac Gauge 4
Calculation Type:
This option will allow the user to select the calculation type for the vacuum gauge. The options
are:
None
Linear Log
Inficon Pirani equation
Gas Compensation: