Slave instrument setup – Super Systems PC Configurator 2 User Manual
Page 158
Super Systems Inc.
Page 158 of 201
Configurator Manual #4562 Rev D
Slave Instrument Setup
Configurator – Slave Instrument Setup menu option
Configurator - Instrument Setup menu option
** All devices on the same slave port must utilize the same protocol
** An address of zero (0) will disable the instrument** Some controllers (AC20 for example)
can provide dual functions (atmosphere and events) and must have the same address assigned
for both.
Clicking on the “Value” field for any instrument will allow the user to select the slave
instrument.
Configurator – Edit Slave Instrument screen
Instrument:
This value will allow the user to select the slave instrument type.
List of Instruments:
The following is the list of instruments available as slave instruments:
SSi
AC20
[T]Eurotherm
2500
SSi
Quad
AO2
[A]Yokogawa
750
Unipro
v3.5
SSi
Quad
AO3
[A]Honeywell UDC3300
Unipro v3.0
SSi Quad AO4
[A]Dualpro LP1 Modbus
[T]Carbpro v3.5 Slave
Yokogawa UT350