Super Systems PC Configurator 2 - Manual (Page 150)

Super Systems Inc. Page 150 of 201 Configurator Manual #4562 Rev D
MGA Setup
Configurator – MGA Setup menu option
This option will allow the user to setup the configuration for an MGA Furnace or an MGA
Endo.
Local Cooler ON Setpoint:
This option will allow the user to set the setpoint to turn the local cooler on. The range is: -
1000 to 4000.
Local Cooler OFF Setpoint:
This option will allow the user to set the setpoint to turn the local cooler off. The range is: -
1000 to 4000.
Auto Cal:
This option will turn the auto calibration process on or off. The options are: On or Off.
Sequencing:
This option will turn the sequencing process on or off. The options are: On or Off.
Sequence Mode:
This option will set the mode for the sequencing process. The options are: Normal or
Specific.
Active CH: